DKG972
Categories
  • Same day Shipment
    for stock items
  • 100% Customer
    Satisfaction
  • 365 Days
    Support on Call
  • Payment
    Secure System
  • Only Best
    Brands

The control box circuitry is protected by a flame resistant, transparent plug-in type plastic housing. A central fixing screw locks the control box to the wiring base. The plug-in control box incorporates the microprocessor based timer, flame check and reset circuits. Manual reset from lock out and set to lock out is provided by a push button with an integrated LED information system.
A variety of cable entry points provides complete flexibility for electrical wiring. The wiring base S98 is equipped with spare- and extraterminals and allows together with a variety of cable entry points utmost flexibility of electrical wiring. The DKG 972 are compatible with the TFI 812. Different are only the pre- and post-ignition times. Max. heating power according the limits in the Gas Appliance Directive.

 

TECHNICAL DATA
Operating voltage : 220 / 240 V (-15... +10%) 50 Hz (±5%) or 110 / 120 V (-15... +10%) 60 Hz (±5%)
Fuse rating:  10 A fast, 6 A slow
Power consumption:  ca. 12 VA
Max. load per output
- term. 3 ignition trafo : 1.0 A, cos ϕ 0.2
- term. 5 + 6 solenoid valves :  0.5 A, cos ϕ 0.4
- term. 7 alarm indicator : 0.5 A, cos ϕ 0.4
- term. 4 auxiliary blower : 2.0 A, cos ϕ 0.4
total load  : 4.0 A, cos ϕ 0.4 max. 16 A during 0,5 sec
Reset time from lock out :  none


Re-cycling (repetition) after a loss-of-flame during operation

Sensitivity : 1 μA
min. ionisation current required : 1.5 μA
Sensitivity for stray light:  0.4 μA
Ionisation probe insulation:  probe - earth greater than 50 MΩ
Stray capacitance : probe- earth less then 1000 pF
max. cable length:  < 3 m
Flame detectors
IRD 1020:  side-on or end-on viewing
UVD 971:  end-on viewing
Weight incl. Wiring base: 190 g
Mounting position :  any
Protection class : IP 40
Approved ambient parameter for control and flame detector :  max. 95% at 30° C
- for operation:  -20° C... +60° C
- for storage :  -20° C... +80° C
Build-up of ice, penetration of water and condensing water are : inadmissible
Approvals according to European standards :  EN 298 and EN 230, as well as all other relevant Directives and standards
Classified acc. to EN 298 : FTLLXN

 

The control box circuitry is protected by a flame resistant, transparent plug-in type plastic housing. A central fixing screw locks the control box to the wiring base. The plug-in control box incorporates the microprocessor based timer, flame check and reset circuits. Manual reset from lock out and set to lock out is provided by a push button with an integrated LED information system.
A variety of cable entry points provides complete flexibility for electrical wiring. The wiring base S98 is equipped with spare- and extraterminals and allows together with a variety of cable entry points utmost flexibility of electrical wiring. The DKG 972 are compatible with the TFI 812. Different are only the pre- and post-ignition times. Max. heating power according the limits in the Gas Appliance Directive.

 

TECHNICAL DATA
Operating voltage : 220 / 240 V (-15... +10%) 50 Hz (±5%) or 110 / 120 V (-15... +10%) 60 Hz (±5%)
Fuse rating:  10 A fast, 6 A slow
Power consumption:  ca. 12 VA
Max. load per output
- term. 3 ignition trafo : 1.0 A, cos ϕ 0.2
- term. 5 + 6 solenoid valves :  0.5 A, cos ϕ 0.4
- term. 7 alarm indicator : 0.5 A, cos ϕ 0.4
- term. 4 auxiliary blower : 2.0 A, cos ϕ 0.4
total load  : 4.0 A, cos ϕ 0.4 max. 16 A during 0,5 sec
Reset time from lock out :  none


Re-cycling (repetition) after a loss-of-flame during operation

Sensitivity : 1 μA
min. ionisation current required : 1.5 μA
Sensitivity for stray light:  0.4 μA
Ionisation probe insulation:  probe - earth greater than 50 MΩ
Stray capacitance : probe- earth less then 1000 pF
max. cable length:  < 3 m
Flame detectors
IRD 1020:  side-on or end-on viewing
UVD 971:  end-on viewing
Weight incl. Wiring base: 190 g
Mounting position :  any
Protection class : IP 40
Approved ambient parameter for control and flame detector :  max. 95% at 30° C
- for operation:  -20° C... +60° C
- for storage :  -20° C... +80° C
Build-up of ice, penetration of water and condensing water are : inadmissible
Approvals according to European standards :  EN 298 and EN 230, as well as all other relevant Directives and standards
Classified acc. to EN 298 : FTLLXN

 

View Product Catalog

Futuristic believes & will help its customers as far as possible, and has therefore a liberal cancellation policy.


Cancellations :

– Please send an email at sales@futuristicclimatecontrols.in
- Cancellation will be accepted only if the product does not meet the specifications mentioned on our portal.




Return Policy :

If you think, you have received the product in a bad condition or if the packaging is tampered with or damaged before delivery, please refuse to accept the package and return the package to the delivery person. Also, please call our customer care at +91 9723810294 or email us at sales@futuristicclimatecontrols.in mentioning your Order ID. We will personally ensure that a brand new replacement is issued to you with no additional cost. Please make sure that the original product tag and packing is intact when you send us the product back.

Apart from the condition reserved herein above, the following products shall not be eligible for return or replacement, viz:

- Any product that exhibits physical damage to the box or to the product;

- Any product that is returned without all original packaging and accessories, including the retail box, manuals, cables, and all other items originally included with the product at the time of delivery;

- Any product without a valid, readable, untampered serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number;

- The refund does not include any service or manpower involved while installation, erection, commissioning, training or any such similar activity;




Replacements :

– If you have received the product, it will be eligible for repair/replacement, only in cases where there are defects found with the product. Replacement will be possible only if you ship the product to our office address, all courier charges borne by you. In case of out of country customers, there will be an additional courier charge for the return of the item to the customer country/city.


– All deliveries are F.O.R. Ahmedabad Airport, India. However, all customs & import duties are to be borne by the customer at the country of import. In case of return, the customs & import duties of our country ( India ) , if charged by the authorities, will be deducted from the refund amount. In case of repair, the import/custom duties as levied by Indian Authorities will be to Customer Account.


- In case of complaints regarding products that come with a warranty from manufacturers, please refer the issue to the concerned manufacturer. Let us know & we’ll help you regarding the same


- Replacement will not be valid if the Instrument is tampered or used without following the instruction procedures as mentioned in User manual.



Refund :

Refunds will be made in the same form or by most convenient form ,that the payment is received, within 10 – 15 working days from the date of cancellation of order. However a levy of 3% will be charged towards payment processing charges (Payment Gateway Charges).